Search

Free shipping on orders over $99

This section doesn’t currently include any content. Add content to this section using the sidebar.

Image caption appears here

Add your deal, information or promotional text

Hagan Ultra Operating Guide

Shop: Hagan Ultra 

Touring:

  • Close the flap over the rear pins
  • Open toe unit jaws by pressing down on toe lever
  • Align boot pin holes with front pins, step down
  • Lock the toe by pulling up on the toe lever all the way up through ratcheting clicks 

Skiing:

  • Raise the flap to expose the rear pins
  • Open toe unit jaws by pressing down on toe lever
  • Align boot pin holes with front pins, step down
  • Step down to engage rear pins
  • Press down on toe lever with ski pole to exit binding

Adjustment:

  • Ensure it is mounted or adjusted on track with a 4mm gap on the pins between the rear of the boot and the heel unit
  • It does not have a release value adjustment

Binding Specifics:

  • The titanium U springs will wear out with regular use. Easily replaceable and expect 1 season’s moderate to heavy use, inspect regularly for large divots. 
  • Snow and ice buildup is possible under the toe springs if the bindings are open and skis are on a backpack after touring in wetter snow. Clear this area with ski pole tip and open and closing. Lock then unlock to check if binding is fully clamping the boot.
  • Leash can be girth hitched to hollow section of the toe lever