Atomic Backland XTD Carbon 115 W Alpine Touring Boot
Couldn't load pickup availability
Description
The Atomic Backland XTD Carbon 115 W is a 115 flex women's touring boot at 1,290 g per boot on a 100 mm last, with 74 degrees of cuff rotation and an ISO 9523 touring sole.
Tech Specs
Atomic Backland XTD Carbon 115 W Alpine Touring Boot
Women who tour most days and still want the descent to count are who the Atomic Backland XTD Carbon 115 W is built for. A 115 flex on a 100 mm medium last carries a 100 mm ski with composure that a 1,290 g boot rarely manages, helped by a carbon-loaded polyamide shell. 74 degrees of cuff rotation puts the Atomic Backland XTD Carbon 115 W closer to a lightweight touring shell on the climb than to the freeride boots it skis alongside.
Is This the Right Boot for You?
CCBB Boot Ratings
CCBB Fit Profile
Why We Like It
- At 1,290 g per boot this is 90 g under the men's shell and still rated 115, which is a rare place to sit in women's touring boots.
- The cuff is genuinely lowered rather than shortened by a spoiler, which suits a lower calf without giving up the wrap of a taller shell.
- Memory Fit reshapes shell, cuff and liner with heat, so a nominal 100 mm last opens considerably further in a fitter's hands.
- The size run starts at a true 22/22.5 shell rather than scaling a men's mold down, which matters at the small end of the range.
Best Uses
- All around backcountry touring
- Skis 88 to 102 mm underfoot
- Long days where the climb sets the pace
- Ski mountaineering with technical approaches
- Women who want one touring boot rather than two
Bootfitter's Advice
The Atomic Backland XTD Carbon 115 W runs a 100 mm medium last, the same nominal width as the men's boot, with a lowered cuff. Where the two differ for fitting purposes is calf height and the size range, which reaches a true 22/22.5 shell at the bottom rather than stopping at 24.
A carbon-loaded polyamide shell, a stiffened nylon, takes Memory Fit heat forming unusually well for a carbon-reinforced material, so a nominal 100 mm last suits feet wider than the number suggests. Mold the 3D Platinum Tour liner, a heat-moldable foam liner, to set heel hold before judging the fit.
Technical Specifications Manufacturer specs · Click to expand
Fit and Construction
Features and Compatibility
Compare the Atomic Backland XTD Carbon 115 W
Backland XTD Carbon 115 W vs. Atomic Backland XTD Carbon 120
The men's build rates 120 flex against 115, weighs 90 g per boot more, carries a taller cuff and runs 24/24.5 to 30/30.5. Shell material, 100 mm last and the Free/Lock 4.5 mechanism are shared. Calf height and size usually settle it before flex does.
Shop Atomic Backland XTD Carbon 120 bootsBackland XTD Carbon 115 W vs. Scarpa Gea RS
The Scarpa Gea RS skis stiffer at 125 with four buckles and 115 g per boot more, on a narrower 101 mm last. The Atomic Backland XTD Carbon 115 W climbs considerably better with 74 degrees of rotation. Both carry ISO 9523 touring soles with tech fittings.
Shop Scarpa Gea RS bootsBackland XTD Carbon 115 W vs. Scarpa Gea
The Scarpa Gea is softer at 100 flex on a roomier 102 mm last with a polyurethane shell, and sits 50 g per boot above this boot. The Atomic Backland XTD Carbon 115 W is stiffer and tours better. Forefoot width and how hard the descent gets decide between them.
Shop Scarpa Gea bootsCommon Questions
What bindings work with the Atomic Backland XTD Carbon 115 W?
How is the Atomic Backland XTD Carbon 115 W built differently from the men's boot?
How much does the Atomic Backland XTD Carbon 115 W weigh?
How much can the shell be modified?
What is the range of motion?
Is the liner washable?
Our Verdict
Frequently Asked Questions
What foot shape works best?
Low- to medium-volume feet with a lower instep and secure heel.
Does it punch well?
Minor boot fitting is possible, but race boots are less forgiving to modify than heavier Grilamid touring boots.





