Atomic Backland Pro W Alpine Touring Boot Ski Boots - Touring Boots - Ski Mountaineering - Womens Atomic
Atomic Backland Pro W Alpine Touring Boot Ski Boots - Touring Boots - Ski Mountaineering - Womens Atomic
Atomic Backland Pro W Alpine Touring Boot Ski Boots - Touring Boots - Ski Mountaineering - Womens Atomic
Atomic Backland Pro W Alpine Touring Boot Ski Boots - Touring Boots - Ski Mountaineering - Womens Atomic
Atomic Backland Pro W Alpine Touring Boot Ski Boots - Touring Boots - Ski Mountaineering - Womens Atomic
Atomic Backland Pro W Alpine Touring Boot Ski Boots - Touring Boots - Ski Mountaineering - Womens Atomic
Atomic Backland Pro W Alpine Touring Boot Ski Boots - Touring Boots - Ski Mountaineering - Womens Atomic
Atomic Backland Pro W Alpine Touring Boot Ski Boots - Touring Boots - Ski Mountaineering - Womens Atomic

Atomic Backland Pro W Alpine Touring Boot

$1,137.00
Size
Build your dream setup!
Boot Fitters Advice
Description

The Atomic Backland Pro W is a women's touring boot on a 98 mm narrow last, with a low cuff, a workable PU shell, and 74 degrees of cuff rotation at 1,056 g per boot.
Tech Specs
View details
Women's All-Round Touring Boot on a 98 mm Last

Atomic Backland Pro W Alpine Touring Boot

The Atomic Backland Pro W is a women's all-round touring boot for skiers who want a light, fittable boot for everyday backcountry outings. A carbon loaded polyurethane shell holds a moderate flex at 1,056 g per boot in a 24/24.5, and a low cuff clears a smaller calf without a spoiler. With 74 degrees of cuff rotation on a 98 mm narrow last and a size run starting at 22/22.5, the Backland Pro W fits feet the rest of the line does not.

Expert Fit Review Fit profile and recommendations reviewed by CCBB bootfitters.

Is This the Right Boot for You?

Best For
Women tourers on skis 90 to 105 mm wide who want a light everyday touring boot on pin bindings, in a size run starting at 22/22.5.
Consider Another Boot If
You want the firmer flex of a carbon cuff, you need a sole that fits frame or MNC bindings, or your foot needs a 100 mm or wider last.

CCBB Boot Ratings

Uphill Efficiency
5/5
74 degrees of rotation at 1,056 g
Downhill Performance
3/5
Carbon loaded PU shell and PU cuff
Walking Comfort
5/5
74 degrees of cuff rotation, low cuff
Transition Speed
4/5
Free/Lock 4.0 external lever

Rating scale: 5 = top of its class, 4 = excellent, 3 = good, 2 = specialized or below average, and 1 = limited.

CCBB Fit Profile

Overall VolumeLow
Toe BoxNarrow
Forefoot VolumeNarrow
Instep HeightLow
Heel HoldGood
Ankle HoldGood
PunchabilityGood
Heat MoldableYes

Why We Like It

  • The low cuff clears a smaller calf without packing out a liner or removing a spoiler, which is the usual compromise on a unisex shell.
  • Polyurethane is the most workable shell material in the Backland line, so this is the boot we reach for on a foot that needs punching.
  • At 1,056 g per boot in a 24/24.5 the Backland Pro W is light enough for long days without giving up the fit range of a PU shell.
  • 74 degrees of cuff rotation matches every other boot in the Backland line, including the carbon models.

Best Uses

  • Everyday backcountry touring on skis 90 to 105 mm wide
  • Skiers needing a size run that starts at 22/22.5
  • Narrow, low-volume feet on a 98 mm last that need fit work
  • Pin binding setups only

Bootfitter's Advice

The Backland Pro W runs a 98 mm last, narrow and low volume, with a low cuff across the whole size run and a ramp angle of 4 degrees. The low cuff is the reason to choose it over the unisex Backland Pro, since it clears a smaller calf without fit work. Confirm size with a shell fit rather than converting from a street-shoe number.

After fitting a lot of women tourers, we find calf shape decides this boot more often than foot shape does. The carbon loaded PU shell and PU cuff both accept heat and punching well, so a sixth toe or a navicular that would rule out a carbon-cuffed boot is workable here, and the 3D Gold Tour liner is heat-moldable.

Fit profile reviewed by CCBB bootfitters. Final sizing should be confirmed with a shell fit whenever possible.

📏 Technical Specifications Manufacturer specs · Click to expand

Fit and Construction

Weight1,056 g per boot (size 24/24.5)
Last98 mm, narrow width and low volume
Range of Motion74 degrees
ShellCarbon loaded PU, a polyurethane reinforced with carbon fiber
CuffPolyurethane (PU), low height across the size run
Forward Lean13, 15 (default), and 17 degrees
Ramp Angle4 degrees
Size Range22/22.5 to 27/27.5

Features and Compatibility

Walk ModeFree/Lock 4.0 with Frictionless Pivot, 74 degrees of cuff rotation
Shell ClosureCross Lace 2.0, a Z-cable routed through the lower buckle
Cuff Closure7000-series aluminum tour buckles with a 30 mm velcro strap
Liner3D Gold Tour, heat-moldable and washable, with Dura Shield
SoleSkywalk non-norm sole with investment cast tech inserts
Binding CompatibilityPin/tech (low-tech) bindings only. The sole meets no ISO norm, so it is not compatible with alpine, GripWalk, frame, or MNC bindings.
Shell TechnologyProlite, Memory Fit, Stretch Guard
IncludedSize adjuster, liner laces

Compare the Atomic Backland Pro W

Backland Pro W vs. Atomic Backland Pro

The two share the carbon loaded PU shell, the 98 mm last, and the non-norm sole. The Atomic Backland Pro runs a regular cuff and sizes from 24/24.5. The Backland Pro W runs a low cuff and sizes from 22/22.5. Calf height and size run separate them rather than performance.

Shop the Atomic Backland Pro

Backland Pro W vs. Atomic Backland XTD Carbon 115 W

The Atomic Backland XTD Carbon 115 W is the stiffer, wider women's touring boot, on a 100 mm last with a carbon loaded shell and a touring sole that also fits frame and MNC bindings. The Backland Pro W is lighter, narrower, more workable, and runs pin bindings only.

Shop the Atomic Backland XTD Carbon 115 W

Backland Pro W vs. Scarpa Gea

Both are women's all-round touring boots. The Scarpa Gea runs a wider 102 mm last with a three-buckle closure and a touring sole. The Atomic Backland Pro W runs a narrow 98 mm last with a cable closure and a non-norm sole for pin bindings. Foot width usually decides it.

Shop the Scarpa Gea

Common Questions

Who should buy the Atomic Backland Pro W?
Women tourers on skis 90 to 105 mm wide who want a light everyday backcountry boot on pin bindings. The Atomic Backland Pro W suits a narrow, low-volume foot, a smaller calf, and anyone needing a size below 24/24.5.
What bindings work with the Atomic Backland Pro W?
The sole is a Skywalk Non-Norm sole with investment cast tech inserts. Pin/tech (low-tech) bindings only. The sole meets no ISO norm, so it is not compatible with alpine, GripWalk, frame, or MNC bindings. Check the binding, not the boot, if you are unsure: if it does not take pins, it does not take this boot.
How is the Atomic Backland Pro W different from the unisex Backland Pro?
The Atomic Backland Pro W uses a low cuff across the whole size run and starts at 22/22.5, where the unisex Atomic Backland Pro uses a regular cuff and starts at 24/24.5. The shell, the 98 mm last, the 74 degrees of rotation, and the non-norm sole are shared.
Can the Atomic Backland Pro W be punched and molded?
Yes, and more freely than the carbon boots in the line. The carbon loaded PU shell and PU cuff both accept heat and punching, and the 3D Gold Tour liner is heat-moldable. We mold the liner as standard.
How does the sizing run on the Atomic Backland Pro W?
The Atomic Backland Pro W covers two Mondo sizes per shell and runs from 22/22.5 to 27/27.5 on a narrow 98 mm last. Confirm your size with a shell fit rather than converting from a street-shoe number.
Will the Atomic Backland Pro W fit a larger calf?
The low cuff is cut to clear a smaller calf, so a larger calf may find it tight at the top. The unisex Atomic Backland Pro uses a regular cuff and is the better starting point in that case, provided the size run reaches far enough down.

Our Verdict

The Atomic Backland Pro W is a women's touring boot that solves calf fit at the shell rather than by removing parts. It weighs 1,056 g per boot at 24/24.5, tours with 74 degrees of cuff rotation, and its polyurethane shell and cuff take the heat and punching that carbon-cuffed boots refuse. The flex is moderate, the 98 mm last is narrow, and the non-norm sole runs pin bindings only. For a narrow foot and a smaller calf on a dedicated touring setup, this is a great boot.

Frequently Asked Questions

What foot shape works best?

Low- to medium-volume feet with a lower instep and secure heel.
Does it punch well?

Minor boot fitting is possible, but race boots are less forgiving to modify than heavier Grilamid touring boots.