Plum Race 99 Operating Guide

Shop: Plum Race 99

Touring:

• Close the flap over the rear pins
• Open toe unit jaws by pressing down on toe lever
• Align boot pin holes with front pins, step down
• Lock the toe by pulling up on the toe lever all the way up through ratcheting clicks 

Skiing:

• Raise the flap to expose the rear pins
• Open toe unit jaws by pressing down on toe lever
• Align boot pin holes with front pins, step down
• Step down to engage rear pins
• Press down on toe lever with ski pole to exit binding

Adjustment:

• Ensure it is mounted or adjusted on track with a 4mm gap on the pins between the rear of the boot and the heel unit
• It does not have a release value adjustment

Binding Specifics:

• The titanium U springs will wear out with regular use. Easily replaceable and expect 1 season’s moderate to heavy use, inspect regularly for large divots. 
• Snow and ice buildup is possible under the toe springs if the bindings are open and skis are on a backpack after touring in wetter snow. Clear this area with ski pole tip and open and closing. Lock then unlock to check if binding is fully clamping the boot.
• Leash can be girth hitched to hollow section of the toe lever