Meidjo 2.1 Operating Guide

Shop: Meidjo 2.1 + brakes + alpine heel + crampon interface

Meidjo 2.1 Operating Guide

Touring:

  • Raise the spring box until the red axl stub that is situated under the spring box settles onto the touring base plate
  • Press the spring box onto the ski topsheet
  • Lock the spring box by raising the touring lock to hook the tail end of the red axl stub
  • Depress the toe lever to open pin wings
  • Align boot tech fittings with toe pins using step-in positioners, and apply downward pressure to engage pins
  • Lock the toe lever by pulling toe lever towards boot until last click is heard and toe lever is in near vertical position
  • Flip heel riser(s) for additional climbing heights (7 and 13 degrees)
  • To exit binding, depress toe lever to open pin wings and step out

Skiing:

  • Raise the spring box until the red axl stub that is situated under the spring box settles onto the touring base plate
  • Depress the toe lever to open pin wings
  • Align boot tech fittings with toe pins using step-in positioners, and apply downward pressure to engage pins
  • To exit binding, depress toe lever to open pin wings and step out

Adjustment:

  • Spring tension - twist red knobs at rear of springs so the white mark is aligned with numbers 1-5, with 1 being 'soft' spring tension and 5 being 'stiff' spring tension

  • Lateral release value - using 3mm allen key, place into red cavity on left side of clear spring box at rear of heel capture assembly. Turn allen key to move left side of black plastic piece to align with tick marks 1-4. Setting 1 is beginner (easy) release, setting 4 is expert (hard) release

  • Adding additional springs - backout the red knobs at rear of springs and remove black springs. Slide the small stainless steel springs inside the black springs, and place the springs back in the spring box and tighten red knob
  • Adding leash cable - insert leash cable eyelet and girth hitch through circular cutout on side of grey aluminum assembly near toe pin wing
Binding specifics:
  • Size Small for boots with BSL between 274-298 mm (mondo size 22.5-26.0)
  • Size Large for boots with BSL between 305-336 mm (mondo size 26.5 to 31.0) 

     

    Build Your Dream Ski Setup

    Tell us how you ski, where you ski, and what you want out of your next setup. Our experts will help you build the right combination of skis, bindings, boots, and skins for you—not just what happens to be on the wall.

    Once we have your setup dialed, we take care of the rest. We’ll make sure everything works together, mount your bindings specifically to you and your boots, trim your skins, and get the entire setup ready for the mountains.

    Your perfect setup starts with expert knowledge and service. When you pick it up, it’s not a box of gear—it’s your complete ski setup, fully mounted, dialed, and ready to go.