Scarpa F1 XT W Touring Boot
Women chasing vertical who still want to ski the line properly at the top are who the Scarpa F1 XT W is built for. A 100 flex on a 100 mm last handles an 85 mm ski on all snow conditions better than the number suggests, thanks to a Carbon Grilamid LFT cuff. At 1,035 g per boot the Scarpa F1 XT W is squarely in fast-and-light territory.
Is This the Right Boot for You?
CCBB Boot Ratings
CCBB Fit Profile
Why We Like It
- At 1,035 g per boot this is one of the lightest shells a skier can still drive a real touring ski with.
- A women's-specific Intuition Cross Fit Tour LT liner is the substantive difference from the men's build, and it changes heel hold more than a spec sheet suggests.
- Two buckles and the Wave LT cable spread pressure across the forefoot without the hot spots a single strap creates.
- A Lambda frame molded into the Grilamid Fiber Glass LFT shell, a glass-reinforced nylon, adds torsional stiffness without added mass.
Best Uses
- Ski mountaineering and spring couloirs
- Long tours and multi-day traverses
- Skis 80 to 95 mm underfoot
- Skimo training and recreational racing
- Women running pin bindings exclusively
Bootfitter's Advice
The Scarpa F1 XT W shares its shell, cuff, closure and sole with the men's Scarpa F1 XT. What changes is the liner, the weight and the size run: 23 to 27 in whole Mondo sizes only. A half-size foot needs a shell fit to decide direction.
A Grilamid Fiber Glass LFT shell, a glass-reinforced nylon, resists punching more than plain Grilamid because the glass fibre holds its shape. Small corrections are realistic; large ones are not. Mold the Intuition Cross Fit Tour LT Women's liner, a heat-moldable foam liner, before judging the fit.
Technical Specifications Manufacturer specs · Click to expand
Fit and Construction
- Weight
- 1,035 g per boot (size 25)
- Last
- 100 mm
- Flex
- 100
- Shell
- Grilamid Fiber Glass LFT, a glass-reinforced nylon
- Cuff
- Carbon Grilamid LFT, a carbon-reinforced nylon
- Tongue
- Synthetic, with an Overlap Shield Tech gaiter
Features and Compatibility
- Walk Mode
- Speed Lock ski/walk mechanism
- Range of Motion
- Not published by Scarpa for the current F1 XT W
- Closure
- Two buckles with a Wave LT closure and a Power Strap Light
- Binding Compatibility
- Pin/tech (low-tech) bindings only. The Vibram UFO LT outsole meets no ISO sole norm, so the F1 XT W is not compatible with alpine, AT/frame or MNC bindings. Optimized Touring Pivot: mount the tech toe 1 mm rearward of standard.
- Sole
- Vibram UFO LT outsole, no ISO sole norm, with tech fittings for pin bindings only
- Forward Lean
- 11, 13 and 15 degrees, adjustable 2 degrees either way with the spoiler
- Liner
- Intuition Cross Fit Tour LT Women's liner, a heat-moldable foam
Compare the Scarpa F1 XT W
F1 XT W vs. Scarpa F1 XT
The men's Scarpa F1 XT is the same shell, cuff, closure, flex and sole, at 1,145 g per boot with a unisex liner and a 24 to 31 size run. The Scarpa F1 XT W adds a women's liner and covers 23 to 27. Foot length usually settles the choice before anything else does.
Shop Scarpa F1 XT bootsF1 XT W vs. Scarpa Gea RS
Two different jobs. The Scarpa Gea RS is a 125 flex freeride touring boot at 1,405 g per boot with an ISO 9523 sole that also takes frame and MNC bindings. The Scarpa F1 XT W is 370 g lighter, far softer, and pin-only. Choose on how much the descent matters against how far the climb goes.
Shop Scarpa Gea RS bootsF1 XT W vs. Scarpa Alien
The Scarpa Alien is a dedicated skimo race boot, lighter again and softer still. The Scarpa F1 XT W carries enough cuff to ski a real descent afterwards, which a race boot is not built to do.
Shop Scarpa Alien boots









