Dynafit ST Rotation 10 Alpine Touring Binding Ski Bindings - Touring Bindings - Freeride Dynafit
Dynafit ST Rotation 10 Alpine Touring Binding Ski Bindings - Touring Bindings - Freeride Dynafit

Dynafit ST Rotation 10 Alpine Touring Binding

$529.95
Shipping calculated at checkout.

11 reviews
Size
3 in stock
View details
All-Mountain Pin Touring Binding

Dynafit ST Rotation 10 Alpine Touring Binding

The Dynafit ST Rotation 10 Alpine Touring Binding is a certified pin binding for touring skiers who split their days between resort laps and backcountry tours and want release they can trust at moderate settings. The rotating toe pivots with the boot to absorb the sideways shocks that cause pre-release, and 10 mm of forward pressure at the heel keeps the 4 to 10 release value steady as the ski bends. At 599 g per binding with brakes, three walk modes and 45 mm of length adjustment, the ST Rotation 10 suits everyday touring, resort uphill laps and skiers moving into their first pin setup.

Specs Verified Ratings and setup guidance verified against manufacturer specifications.

Is This the Right Binding for You?

Best For
Touring skiers who set release between 4 and 10 and want TÜV-certified pin-binding release, a brake and easy step-in for everyday tours and resort laps.
Consider Another Binding If
You need a release value above 10, want a lighter binding for long climbs, or ski boots without tech inserts.

CCBB Binding Ratings

Uphill Efficiency
3/5
599 g per binding, three walk modes
Descent Security
4/5
TÜV-certified 4 to 10 release, rotating toe
Transition Speed
4/5
Hub-centering toe, brake locks in walk mode
Serviceability
4/5
Lifetime warranty with registration

Rating scale: 5 = top of its class, 4 = excellent, 3 = good, 2 = specialized or below average, and 1 = limited.

CCBB Binding Profile

Release Range4 to 10 vertical and lateral
CertificationTÜV certified
Brake Width90, 105 or 120 mm
Riser HeightsThree walk modes
Boot CompatibilityBoots with certified tech inserts
Adjustability45 mm length range, 10 mm forward pressure

Why We Like It

  • The rotating toe turns with the boot under a sideways jolt and returns to center, which cuts pre-release on firm snow without raising the release setting.
  • TÜV-certified release from 4 to 10 gives lighter and intermediate skiers a pin binding tested to a recognized release standard.
  • Hub centering clicks the toe into its neutral position for step-in, and step-in side towers guide the boot onto the pins.
  • 45 mm of length adjustment covers several boot sole lengths, useful for a shared ski or a change of boots, and the brake locks itself in walk mode.

Best Uses

  • Everyday backcountry touring
  • Resort uphill laps
  • First pin-binding setups
  • Lighter and intermediate skiers
  • Touring skis 75 to 120 mm underfoot

Mounting and Setup Advice

Pick the brake equal to or up to 15 mm wider than the ski waist: 90, 105 or 120 mm, which covers skis from 75 to 120 mm underfoot. The ST Rotation family uses its own hole pattern, so moving to a different pin binding later usually means redrilling. A shop should set release for your weight, height, age, boot sole length and skier type and test it after mounting.

If your release setting sits near the top of the range, or you ski hard and fast, the ST Rotation 14 gives the same design with a 7 to 14 range. The ST Rotation 10 needs a boot with certified tech inserts; bring your boots in so we can check them and set the release.

Mounting and setup guidance reviewed by CCBB staff.

Technical Specifications Manufacturer specs · Click to expand

Fit and Setup

Release Value
4 to 10 vertical and lateral
Certification
TÜV certified
Weight
599 g per binding with brakes
Brake Widths
90, 105, 120 mm
Length Adjustment
45 mm
Forward Pressure
10 mm
Walk Modes
Three

Construction and Compatibility

Toe
Rotating toe with hub centering, step-in side towers
Heel
Bayonet lock, brake that locks in walk mode
Materials
Forged 7075 aluminum, chromoly, high-strength synthetics, stainless steel
Boot Compatibility
Pin/tech binding. Works with boots that have certified tech (pin) inserts, typically ISO 9523 (Touring) soles. Boots without tech inserts, including ISO 5355 (Alpine) and GripWalk (ISO 23223) boots without inserts, are not compatible.
Warranty
Lifetime warranty with registration
Recommended Use
All-mountain ski touring and resort uphill

Compare the Dynafit ST Rotation 10

ST Rotation 10 vs. Dynafit ST Rotation 14 Alpine Touring Binding

The Dynafit ST Rotation 14 Alpine Touring Binding uses the same rotating toe and forward pressure with a 7 to 14 release range for heavier and harder-charging skiers. Choose by the release value a shop sets for you.

Shop Dynafit ST Rotation 14 Alpine Touring Binding

ST Rotation 10 vs. Dynafit Seven Summits Plus Touring Binding

The Dynafit Seven Summits Plus Touring Binding shares the 4 to 10 range and a brake at 380 g per binding, without the rotating toe. Pick the Seven Summits Plus for weight, the ST Rotation 10 for certified release.

Shop Dynafit Seven Summits Plus Touring Binding

ST Rotation 10 vs. Dynafit Blacklight Long Travel Touring Binding

The Dynafit Blacklight Long Travel Touring Binding offers 50 mm of length adjustment at 420 g per binding, with lateral release adjustable and vertical release fixed. The ST Rotation 10 adds certified, fully adjustable release.

Shop Dynafit Blacklight Long Travel Touring Binding

Common Questions

Who should buy the Dynafit ST Rotation 10 Alpine Touring Binding?
The Dynafit ST Rotation 10 Alpine Touring Binding suits touring skiers who set release between 4 and 10 and want certified pin-binding release with a brake. The rotating toe and 10 mm of forward pressure keep release consistent, at 599 g per binding.
What boots work with the Dynafit ST Rotation 10 Alpine Touring Binding?
The ST Rotation 10 is a pin/tech binding and works with boots that have certified tech (pin) inserts, typically ISO 9523 (Touring) soles. Boots without tech inserts, including ISO 5355 (Alpine) and GripWalk (ISO 23223) boots without inserts, are not compatible. Check your boot for tech inserts at the toe and heel before ordering.
Is the release on the ST Rotation 10 certified?
Yes. The ST Rotation 10 is TÜV certified with vertical and lateral release from 4 to 10. A shop should set and test the release for your weight, height, age, boot sole length and skier type.
What brake size do I need for the ST Rotation 10?
Choose a brake equal to or up to 15 mm wider than the ski waist. The ST Rotation 10 comes with 90, 105 or 120 mm brakes, covering skis from 75 to 120 mm underfoot.
What does the rotating toe do?
The toe pivots slightly with the boot when the ski takes a sideways shock, then recenters. The pivot absorbs jolts that would otherwise open the toe, which reduces pre-release without a higher release setting.
How much does the ST Rotation 10 weigh?
599 g per binding with brakes.

Our Verdict

The Dynafit ST Rotation 10 Alpine Touring Binding brings certified release to a pin binding without the weight of a frame. A rotating toe and 10 mm of forward pressure keep the 4 to 10 release consistent, and hub centering with step-in side towers makes entry easy, at 599 g per binding with brakes. Skiers who set release above 10 should step up to the ST Rotation 14; skiers who want one dependable binding for resort laps and backcountry tours should start here.