Black Diamond Helio 110/145 Operating Guide
Touring:
- Close the flap over the rear pins
- Open toe unit jaws by pressing down on toe lever
- Align boot pin holes with front pins, step down
- Lock the toe by pulling up on the toe lever all the way up through ratcheting clicks
Skiing:
- Raise the flap to expose the rear pins
- Open toe unit jaws by pressing down on toe lever
- Align boot pin holes with front pins, step down
- Step down to engage rear pins
- Press down on toe lever with ski pole to exit binding
Adjustment:
- Ensure it is mounted or adjusted on track with a 4mm gap on the pins between the rear of the boot and the heel unit
- It does not have a release value adjustment
Binding Specifics:
- The titanium U springs will wear out with regular use. Easily replaceable and expect 1 season’s moderate to heavy use, inspect regularly for large divots.
- Snow and ice buildup is possible under the toe springs if the bindings are open and skis are on a backpack after touring in wetter snow. Clear this area with ski pole tip and open and closing. Lock then unlock to check if binding is fully clamping the boot.
- Leash can be girth hitched to hollow section of the toe lever