Ski Trab Attacco Titan Vario 2 Binding
Ski Trab Attacco Titan Vario 2 Binding
The Ski Trab Attacco Titan Vario 2 Binding is a light pin binding for ski mountaineers who want strong retention and release that holds steady as the ski flexes, without a brake. The titanium toe's independent jaws let one side flex without the toe opening, and the gapless heel rides on a plate with 8 mm of travel, with fixed release sold in 5 to 7, 7 to 9 and 9 to 11 versions. At 250 g per binding, with climbing positions at 8.7 and 10.5 degrees plus flat and 24 mm of length adjustment, the Titan Vario 2 suits ski mountaineering, long tours and steep spring lines.
Is This the Right Binding for You?
CCBB Binding Ratings
CCBB Binding Profile
Why We Like It
- Independent toe jaws let one side flex under a sideways load without opening the toe, which holds the boot through hard impacts.
- The gapless heel sits on a plate with 8 mm of travel, so release behaves the same as the ski bends through a turn.
- Three spring versions cover release values from 5 to 11, chosen at purchase to match the skier.
- 24 mm of heel adjustment and a crampon attachment at the toe make it a practical ski mountaineering binding.
Best Uses
- Ski mountaineering
- Long tours where weight matters
- Steep spring lines
- Skiers who use leashes
- Narrow and mid-width touring skis
Mounting and Setup Advice
Release is set by spring version: 5 to 7, 7 to 9 or 9 to 11. Choose the version that covers the release value a shop calculates for your weight, height, age, boot sole length and skier type. The binding has no brake, so use a leash; the Titan Vario 2 ST adds a brake.
The binding needs certified tech inserts. Bring your boots in so we can confirm insert fit and set the heel on its plate.
Technical Specifications Manufacturer specs · Click to expand
Fit and Setup
- Release Value
- Fixed. 5 to 7, 7 to 9 or 9 to 11 versions, vertical and lateral
- Weight
- 250 g per binding
- Brake
- None, leash required
- Length Adjustment
- 24 mm
- Heel Flex Travel
- 8 mm
- Climbing Aids
- Flat, 8.7 and 10.5 degrees
- Ski Mode Ramp
- 2.8 degrees
Construction and Compatibility
- Toe
- Titanium toe with independent jaws, crampon attachment
- Heel
- Gapless heel on a flex plate
- Materials
- Ergal, a high-strength aluminum alloy, with titanium, steel and technopolymer
- Boot Compatibility
- Pin/tech binding. Works with boots that have certified tech (pin) inserts, typically ISO 9523 (Touring) soles. Boots without tech inserts, including ISO 5355 (Alpine) and GripWalk (ISO 23223) boots without inserts, are not compatible.
- Recommended Use
- Ski mountaineering
Compare the Ski Trab Titan Vario 2
Titan Vario 2 vs. Ski Trab Attacco Titan Vario 2 ST Binding
The Ski Trab Attacco Titan Vario 2 ST Binding is the same toe and heel with a brake, at 299 g per binding. Choose it if you want a brake.
Shop Ski Trab Attacco Titan Vario 2 ST BindingTitan Vario 2 vs. Ski Trab Attacco Gara Titan Binding
The Ski Trab Attacco Gara Titan Binding uses the same titanium toe on a race heel at 120 g per binding, with one climbing position.
Shop Ski Trab Attacco Gara Titan BindingTitan Vario 2 vs. Marker Alpinist 8 Alpine Touring Binding
The Marker Alpinist 8 Alpine Touring Binding weighs 270 g per binding without brake and adjusts lateral release from 3 to 8.
Shop Marker Alpinist 8 Alpine Touring Binding




