Shop: Dynafit Low Tech Race 105 (LTR/PDG) Manual

DOWNLOAD LTR/PDG User Guide

Touring:

• Close the flap over the rear pins
• Open toe unit jaws by pressing down on toe lever
• Align boot pin holes with front pins, step down
• Lock the toe by pulling up on the toe lever all the way up through ratcheting clicks 

Skiing:

• Raise the flap to expose the rear pins
• Open toe unit jaws by pressing down on toe lever
• Align boot pin holes with front pins, step down
• Step down to engage rear pins
• Press down on toe lever with ski pole to exit binding
  

Adjustment:

• The PDG and LTR bindings are not adjustable
• Ensure it is mounted with a 4mm gap on the pins between the rear of the boot and the heel unit
• It does not have a release value adjustment

Binding Specifics:

• Examine plastic heel unit for cracks and wear periodically
• Snow and ice buildup is possible under the toe springs if the bindings are open and skis are on a backpack after touring in wetter snow. Clear this area with ski pole tip and open and closing. Lock then unlock to check if binding is fully clamping the boot.
• Leash can be girth hitched to hollow section of the front of the toe piece body and clipped to boot
• We see breakages in the toe lever from abuse, be gentle locking and unlocking the toe piece